Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Air Filter in the Suzuki Swift

Model: Suzuki Swift Rs41, AZG, MK 5 - Years 2010-2017
Part: Cabin air filter

Before discovering how to correctly replace the cabin air filter in the Suzuki Swift, remember that this operation must be performed with the engine off. Once you have ensured this, go to the passenger side and proceed to remove the glove compartment. The box containing the air filter is located just behind, so simply remove the plastic cover and slide out the used filter. Finally, replace it with a new model that is fully compatible with the car and correctly reposition the cover that was removed earlier. Reassemble the glove compartment and the operation is complete.

Updated on 7 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the engine air filter of the Suzuki Swift 6.
How to replace the engine air filter of the Suzuki Swift 6.
Suzuki Swift (2017-2024 / MK 6, A2L) To replace the engine air filter of your sixth-generation Suzuki Swift by yourself, you really only need a few minutes. All you have to do is read th…
How to replace the cabin air filter of the Suzuki Swift
How to replace the cabin air filter of the Suzuki Swift
Suzuki Swift (2004-2010 / MK 4, Rs41) If you own a Suzuki Swift and are wondering how you can replace the cabin air filter yourself, then all you have to do is read the following guide an…
How to Replace the Cabin Filter on a Suzuki Swift
How to Replace the Cabin Filter on a Suzuki Swift
Suzuki Swift (2004-2010 / MK 4, Rs41) Open the glove compartment and unclip the drawer inside the dashboard using a plastic lever (use a screwdriver if there are screws). Once this is don…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos