Do it yourself
| ||||
|
Suzuki Swift - Video tutorial
Model: Suzuki Swift
MK 6, A2L
- Years 2017-2024 In order to replace the battery inside the key of your Suzuki Swift you only need a common flat head screwdriver. In fact, the first thing to do is to locate the small plastic button located on the back of the cover and press it so as to be able to easily remove the physical emergency key. Then insert the head of the flat screwdriver into the lower slot of the cover and make a slight push towards the outside so as to open it. At this point all that remains is to remove the old battery and replace it with a new one. Finally, reassemble the cover and re-insert the physical key inside it.
Posted on 10 April 2024 by ScegliAuto
Other guides that may interest you |
Frequently Asked QuestionsReplace the steering angle sensor on the Volkswagen Golf 5When the steering angle sensor malfunction warning light comes on, it may need to be replaced as follows: first remove the steering wheel and the lower steering wheel guard by removing the three fixing screws. The steering sensor is located just below the steering column. To release it you need to have a small screwdriver and insert it into the hole on the front, push the screwdriver all the way down until the clips at the bottom are released. Next, pull down on the back of the card containing the sensor and disengage it from the steering column. At that point take the new card and reposition it, after which proceed backwards to reassemble the various components. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.061
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |