Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install Rear Speakers in the Suzuki Jimny?

Model: Suzuki Jimny Jb74w, Jb64w - Years: 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Speaker

See other generations:
Video tutorial

In this video, you can see how to install rear speakers in the Suzuki Jimny. This car does not come with such speakers, but you can use specific brackets to bolt to the holes shown in the video, obviously of the right size for your speakers.

To access the holes, you will need to remove part of the boot area; start by removing the rear seat, then proceed with the tool compartment, the plastic footrest, and the bulkheads of the compartment. At this point, fix your brackets to the side holes and then mount the speakers, which will need to be connected to the appropriate outputs of the stereo.


Updated on 14 May 2026 by ScegliAuto


Related tutorials

How to Replace the Speakers in a Suzuki Jimny?
How to Replace the Speakers in a Suzuki Jimny?
Suzuki Jimny (2018-2026 / Jb74w, Jb64w) Replacing the speakers in a Suzuki Jimny is very simple. To access the speaker, you need to remove the door panel. Start by prying off the cover of t…
How to Replace the Rear Lights on a Suzuki Jimny
How to Replace the Rear Lights on a Suzuki Jimny
Suzuki Jimny (2018-2026 / Jb74w, Jb64w) In this video tutorial, you will learn how to remove and replace the rear lights on a Suzuki Jimny in simple and quick steps. First, move to the rear…
How to Replace the Auxiliary Belt on a Suzuki Jimny
How to Replace the Auxiliary Belt on a Suzuki Jimny
Suzuki Jimny (1998-2018 / Jb43, Jb53, Jb33, Jb23) Before you can start, open the bonnet of your Suzuki Jimny. Begin by loosening the tensioner by slightly unscrewing the fixing bolt. This will free t…

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos