Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Lights on a Suzuki Jimny

Model: Suzuki Jimny Jb64w, Jb74w - Years 2018-2026
Part: Tail light

In this video tutorial, you will learn how to remove and replace the rear lights on a Suzuki Jimny in simple and quick steps. First, move to the rear of your car and start unscrewing the fixing screws for the lights, which are located at the back (inside the rear bumper), as shown in the video. At this point, disconnect the electrical connectors for the bulbs to remove and replace the light with the new one, as illustrated in the video; if necessary, replace the bulbs and reassemble everything, following the video tutorial to the end!

Updated on 19 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Where are the fuses located on the Suzuki Jimny?
Where are the fuses located on the Suzuki Jimny?
Suzuki Jimny (2018-2026 / Jb64w, Jb74w) All fuses on the Suzuki Jimny are divided within specific fuse boxes installed in the vehicle: this model has two fuse boxes. The first is located in…
Where are the Fuses Located in the Suzuki Jimny?
Where are the Fuses Located in the Suzuki Jimny?
Suzuki Jimny (1998-2018 / Jb23, Jb33, Jb43, Jb53) The fuses in the Suzuki Jimny are located inside the designated fuse boxes situated within the vehicle: there are two, one inside the cabin and one i…
Where are the fuses located in the Suzuki Jimny?
Where are the fuses located in the Suzuki Jimny?
Suzuki Jimny (1998-2018 / Jb23, Jb33, Jb43, Jb53) Each fuse of the Suzuki Jimny is contained within one of the appropriate fuse boxes located inside the vehicle: there are two of them, one inside the…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos