Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Rear Bumper on Suzuki Jimny

Model: Suzuki Jimny Jb43, Jb53, Jb33, Jb23 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Rear bumper

See other generations:
Video tutorial

First, remove the two taillights by unscrewing the two screws that secure them and disconnecting the bulbs. Once removed, unscrew the three 10 mm bolts located above the bumper and under the boot, and the other 10 mm bolt located at the bottom of the taillight housing.

At this point, unscrew the screws located in the wheel arches, as shown in the video, then the bolts securing the bumper from underneath and you're done. Pull the bumper off by hand and disconnect the cables.

For the installation of the new bumper, simply reverse the steps. As you can see, this is neither a complex nor particularly lengthy task.


Updated on 11 April 2026 by ScegliAuto


Related tutorials

How to Remove the Front Bumper on a Suzuki Jimny
How to Remove the Front Bumper on a Suzuki Jimny
Suzuki Jimny (1998-2018 / Jb43, Jb53, Jb33, Jb23) Before starting, open the front bonnet of your Suzuki Jimny. Begin by prying out and removing the clips that secure the bumper to the chassis using a…
How to Replace the Front Bumper Grille on a Suzuki Jimny
How to Replace the Front Bumper Grille on a Suzuki Jimny
Suzuki Jimny (2018-2026 / Jb74w, Jb64w) This guide provides the main instructions on how to remove and replace the front bumper grille on a Suzuki Jimny. First, open the bonnet of your car …
Removing the Bumper on a Jimny
Suzuki Jimny (1998-2018 / Jb43, Jb53, Jb33, Jb23) Removing the front bumper of the Jimny? Here’s how to remove it from the top. Lift the bonnet and secure it, then first unscrew the screws in the bla…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos