Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Dismantling the Instrument Cluster on a Suzuki Grand Vitara

Model: Suzuki Grand Vitara MK 2 - Years 2005-2015
Part: Instrument cluster

Unscrew the two screws located at the top of the instrument cluster, as shown at the beginning of the video. This will allow you to remove the outermost part of the cluster. Now you have access to the other screws that hold the speedometer in place. Done! At this point, all you need to do is extract the cluster and disconnect its rear connector. Now you can open the cluster and replace the small bulbs that illuminate it, if necessary; otherwise, replace it with a new cluster, obviously proceeding in reverse until complete reassembly. This is a fairly simple operation and within everyone's reach.

Updated on 16 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on the Suzuki Grand Vitara
How to Reset the Service Light on the Suzuki Grand Vitara
Suzuki Grand Vitara (2005-2015 / MK 2) To reset the service light on the Suzuki Grand Vitara, press the accelerator pedal while the instrument cluster is off. While holding it down, insert…
How to replace the front wheel bearing of the Suzuki Grand Vitara 2.4
How to replace the front wheel bearing of the Suzuki Grand Vitara 2.4
Suzuki Grand Vitara (2005-2015 / MK 2) The following steps will illustrate the procedure for disassembling and replacing the front wheel bearing of the Suzuki Grand Vitara 2.4. First, lift…
How to Remove the Battery from a Suzuki Grand Vitara
How to Remove the Battery from a Suzuki Grand Vitara
Suzuki Grand Vitara (2005-2015 / MK 2) How to remove the engine battery from a Suzuki Grand Vitara? Let's look at the removal process. Open the car door and pull up the engine compartment …

How to Open the Bonnet on the Lancia Y

To open the bonnet on this vehicle, follow these simple instructions: first, open the driver's door and locate the lever positioned just below the dashboard, marked with an image of the vehicle with the bonnet open. Pull this lever towards you until you hear a "click" indicating the bonnet is released. Next, exit the cabin and stand in front of the bonnet to disengage the safety catch and complete the opening. To do this, slightly lift the bonnet, locate the yellow lever underneath, and pull it to the left to fully release and open the bonnet.

Watch the video!


by ScegliAuto

More videos