Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace Shock Absorbers on a Suzuki Swift

Model: Suzuki Swift MK 3 - Years: 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
Part: Shocks

See other generations:
Video tutorial

In this video tutorial, you will see how to replace the shock absorbers on a Suzuki Swift by following these steps: First, position the vehicle on a mobile lift to raise it, then remove the wheel. Unscrew the upper mounting bracket of the stabiliser link using a 1 spanner and a 15 mm socket.

Now, with a ratchet spanner, disconnect the fixing pin of the flexible hose. Next, use a flat screwdriver to disconnect the wiring support of the ABS sensor.

Then, unscrew the lower fixing element of the shock absorber support. Remove the fixing bolts of the protective panel.

Unscrew the upper fixing nut of the shock absorber strut. Before installation, manually bleed the shock absorber 3-5 times.


Updated on 18 May 2026 by ScegliAuto


Related tutorials

Replacing the Rear Shock Absorbers of the Suzuki Swift
Replacing the Rear Shock Absorbers of the Suzuki Swift
Suzuki Swift (2004-2010 / MK 4, Rs41) In this video tutorial, learn how to remove and replace the rear shock absorbers of the Suzuki Swift by following the instructions below. First, lift…
Disassembly of Front Shock Absorbers on Suzuki Swift 3
Disassembly of Front Shock Absorbers on Suzuki Swift 3
Suzuki Swift (2004-2010 / MK 4, Rs41) In this video, you will learn how to disassemble and replace the front shock absorbers on a third-generation Suzuki Swift. First, lift the vehicle an…
How to Perform a Service Reset on a Suzuki Swift
How to Perform a Service Reset on a Suzuki Swift
Suzuki Swift (2017-2024 / MK 6, A2L) On the Suzuki Swift, the maintenance interval and oil change reset is done from the instrument cluster. With the Suzuki Swift stationary and the engi…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos