Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlight Bulbs on the Suzuki Kizashi

Model: Suzuki Kizashi MK 1 - Years 2010-2016
Part: Light bulb

In this video tutorial, you will learn how to dismantle and replace the front headlight bulbs on the Suzuki Kizashi, following the instructions below. First, open the bonnet of your car and start by unscrewing the fixing screws of the headlight using a cross-head screwdriver; then gently remove or shift the headlight to access the bulbs, as shown in the video. At this point, remove the plastic cap and disconnect the electrical connector of the bulb; remove it and replace it with the new one, finally reassembling everything!

Updated on 22 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Seat of the Suzuki Kizashi - Maruti Kizashi
How to Remove the Front Seat of the Suzuki Kizashi - Maruti Kizashi
Suzuki Kizashi (2010-2016 / MK 1) This guide outlines the steps necessary to remove and replace the front seat of the Suzuki Kizashi, as well as the Maruti Kizashi. First, open the fr…
Where is the fuse box of the Suzuki Kizashi located?
Where is the fuse box of the Suzuki Kizashi located?
Suzuki Kizashi (2010-2016 / MK 1) In this new guide, we will help you find the fuse box inside your Suzuki Kizashi in just a few seconds. All you have to do is go inside the vehicle a…
How to Replace the Cabin Filter on the Suzuki Kizashi?
How to Replace the Cabin Filter on the Suzuki Kizashi?
Suzuki Kizashi (2010-2016 / MK 1) This tutorial shows how to replace the cabin filter on the Suzuki Kizashi, a very simple and quick operation. First, sit in the passenger seat, then …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos