Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlight Bulb on the Suzuki Kizashi?

Model: Suzuki Kizashi MK 1 - Years 2010-2016
Part: Headlight bulb

To replace the headlight bulb on the Suzuki Kizashi, open the bonnet to access the screws located in the centre of the front bumper. Once these screws are loosened along with those at the bottom of the bumper, you can detach it and access the additional screws that secure the headlight. Once the headlight is freed, you can pull it out of its housing and disconnect the connector at the back. This will allow you to open the inner circular cover, remove the bulb, and replace it with a new one.

Updated on 9 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Seat of the Suzuki Kizashi - Maruti Kizashi
How to Remove the Front Seat of the Suzuki Kizashi - Maruti Kizashi
Suzuki Kizashi (2010-2016 / MK 1) This guide outlines the steps necessary to remove and replace the front seat of the Suzuki Kizashi, as well as the Maruti Kizashi. First, open the fr…
How to Replace the Front Headlight Bulbs on the Suzuki Kizashi
How to Replace the Front Headlight Bulbs on the Suzuki Kizashi
Suzuki Kizashi (2010-2016 / MK 1) In this video tutorial, you will learn how to dismantle and replace the front headlight bulbs on the Suzuki Kizashi, following the instructions below…
Where is the fuse box of the Suzuki Kizashi located?
Where is the fuse box of the Suzuki Kizashi located?
Suzuki Kizashi (2010-2016 / MK 1) In this new guide, we will help you find the fuse box inside your Suzuki Kizashi in just a few seconds. All you have to do is go inside the vehicle a…

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos