Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Program the Remote Control of the Suzuki SX4

Model: Suzuki Sx4 GY, MK 1, EY, RW - Years 2006-2014
Part: Key

In this short video, you will see the steps that will allow you to manually program the key remote of the Suzuki SX4, as well as the Fiat Sedici. First, get into the vehicle and close all the doors; then insert the key into the ignition and turn the ignition on, before turning it off and removing the key, as shown in the video. Next, immediately open and close the driver's door three times; then turn the ignition on and off again and press the unlock button on the remote!

Updated on 31 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Remote Battery in a Suzuki SX4?
How to Replace the Remote Battery in a Suzuki SX4?
Suzuki Sx4 (2006-2014 / GY, MK 1, EY, RW) As we can see in this tutorial, replacing the remote battery in the Suzuki SX4 is an extremely simple and quick task. To do this, you will only need …
How to replace the battery of the Suzuki SX4 key remote control.
How to replace the battery of the Suzuki SX4 key remote control.
Suzuki Sx4 (2006-2014 / GY, MK 1, EY, RW) Today's instructions will allow us to disassemble and replace the battery of the remote key for the Suzuki SX4. First, we take our remote and begin t…
How do you replace the battery of the Suzuki SX-4 remote control?
How do you replace the battery of the Suzuki SX-4 remote control?
Suzuki Sx4 (2006-2014 / GY, MK 1, EY, RW) In order to replace the battery of the Suzuki SX-4 remote control, you need to pry with an object in the top part, so that you can separate the two h…

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos