Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a 2013 Suzuki SX4

Model: Suzuki Sx4 MK 1, RW, EY, GY - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Service warning light

See other generations:
Video tutorial

In this new mini guide for your 2013 Suzuki SX4, discover the various steps needed to manually reset the service light on your car. First, enter the cabin and ensure all doors are properly closed. Then, turn on the instrument panel and press the button located below the speedometer several times until you see the total mileage displayed on the mini display.

Next, fully depress the accelerator pedal and simultaneously press the brake pedal seven times in a row. Finally, release the accelerator, and you are done.


Updated on 6 June 2026 by ScegliAuto


Related tutorials

How to reset the "Service" light on a Suzuki SX4?
How to reset the "Service" light on a Suzuki SX4?
Suzuki Sx4 (2013-2021 / JY, MK 2) To reset the "Service" light on a Suzuki SX4, turn on the instrument panel without starting the engine by turning the key in the ignition switch. Pre…
How to reset the tire pressure on Suzuki SX4
How to reset the tire pressure on Suzuki SX4
Suzuki Sx4 (2013-2021 / JY, MK 2) To reset the tire pressure on the Suzuki SX4, you can follow these general steps. Turn on the car: make sure all tires are inflated to the correct pr…
How to Reset the Tyre Warning Light on a Suzuki SX4
How to Reset the Tyre Warning Light on a Suzuki SX4
Suzuki Sx4 (2006-2014 / MK 1, RW, EY, GY) To reset the tyre warning light on the Suzuki SX4, first, get into the vehicle, close the doors, and turn on the instrument panel without starting th…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos