Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Change Service Light on the Suzuki SX4

Model: Suzuki Sx4 GY, MK 1, EY, RW - Years 2006-2014
Part: Service warning light

Below are the steps necessary to reset the oil change service light on the vehicle. First, switch on the ignition. Press and hold the button located on the right side of the instrument panel at the top (to the right of the rev counter) for about three seconds. Then, rotate the same button until you highlight the "oil change service" option. At this point, select the "reset oil change" option with the same button, then press and hold the button again for a few seconds until the indication to switch off the ignition appears, indicating that the operation has been completed.

Updated on 24 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Resetting the service light indicator on the Suzuki SX4.
Resetting the service light indicator on the Suzuki SX4.
Suzuki Sx4 (2006-2014 / GY, MK 1, EY, RW) Below are the instructions on how to reset the service light for the regular maintenance of the engine oil change on the Suzuki SX4. First, get in th…
How to reset the "Service" light on a Suzuki SX4?
How to reset the "Service" light on a Suzuki SX4?
Suzuki Sx4 (2013-2021 / JY, MK 2) To reset the "Service" light on a Suzuki SX4, turn on the instrument panel without starting the engine by turning the key in the ignition switch. Pre…
How to Reset the Service Light on a 2013 Suzuki SX4
How to Reset the Service Light on a 2013 Suzuki SX4
Suzuki Sx4 (2006-2014 / GY, MK 1, EY, RW) In this new mini guide for your 2013 Suzuki SX4, discover the various steps needed to manually reset the service light on your car. First, enter the …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos