Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel of the New Suzuki Swift

Model: Suzuki Swift MK 6, A2L - Years 2017-2024
Part: Door trim panel

To remove the inner door panel of your new Suzuki Swift, follow the instructions in this mini guide. Turn off the car completely and enter the vehicle at the panel you wish to remove. Using a small flat screwdriver, remove the plastic protective cover on the handle and unscrew the screw underneath. Do the same with the small cover in the centre of the door and unscrew the screw located just below it. Now, unscrew all the other screws around the perimeter of the panel, and finally, pull the panel towards you to remove it completely.

Updated on 24 June 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Change the Engine Oil of a Suzuki Swift
How to Change the Engine Oil of a Suzuki Swift
Suzuki Swift (2004-2010 / MK 4, Rs41) Before you begin, lift the front of your Suzuki Swift to access the oil drain plug. Start by loosening and removing this plug. Once done, wait for al…
How to remove the front door panel of the Suzuki Swift
How to remove the front door panel of the Suzuki Swift
Suzuki Swift (2017-2024 / MK 6, A2L) Below we will discover the instructions that will allow us to disassemble and remove the front door panel of the Suzuki Swift. First, we open the fro…
How to Perform a Service Reset on a Suzuki Swift
How to Perform a Service Reset on a Suzuki Swift
Suzuki Swift (2017-2024 / MK 6, A2L) On the Suzuki Swift, the maintenance interval and oil change reset is done from the instrument cluster. With the Suzuki Swift stationary and the engi…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos