Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Wiper on a Suzuki Swift?

Model: Suzuki Swift MK 4, Rs41 - Years 2004-2010
Part: Windshield wipers

As you can see in this tutorial, replacing the rear wiper on a Suzuki Swift is an extremely simple and quick operation. First, ensure the wiper is in the parked position; if not, activate it and stop it as soon as it reaches that position. Then, lift it fully and rotate the blade as far as possible. Once done, continue rotating with force until the blade is disengaged from the arm. To fit the replacement, simply position it, press it against the arm, and clip the pin into the designated housing.

Updated on 5 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Wipers on the Suzuki Swift?
How to Replace the Front Wipers on the Suzuki Swift?
Suzuki Swift (2010-2017 / Rs41, AZG, MK 5) In this tutorial, you will see how to replace the front wipers on the Suzuki Swift, a very simple and quick operation. First, ensure that the wipers …
How to Replace the Rear Light of the Suzuki Swift
How to Replace the Rear Light of the Suzuki Swift
Suzuki Swift (2010-2017 / Rs41, AZG, MK 5) Follow the procedure to remove and replace the rear light of the Suzuki Swift. First, open the boot and start unscrewing the two fixing screws locate…
How to Replace the Bulb of the Rear Light of the Suzuki Swift
How to Replace the Bulb of the Rear Light of the Suzuki Swift
Suzuki Swift (2010-2017 / Rs41, AZG, MK 5) In this short and simple guide, you will see how to remove and replace the bulbs of the rear light of the Suzuki Swift. First, move to the rear and o…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos