Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Replacing Number Plate Lights

Model: Suzuki Sx4 GY, MK 1, EY, RW - Years 2006-2014
Part: Light bulb

To replace the number plate lights, you need to remove the carpet covering under the rear hatch: unclip the retaining clips along the lower edge of the covering to lower it and access the lamp holders for the number plate lights; unclip the lamp holder by turning it anti-clockwise and remove the old bulb to insert the new one (T10 fitting); proceed in the same way to replace the other bulb, ensure both light up correctly, and then reverse the steps for reassembly.

Updated on 16 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Number Plate Light Bulb on a Suzuki SX4
How to Replace the Number Plate Light Bulb on a Suzuki SX4
Suzuki Sx4 (2006-2014 / GY, MK 1, EY, RW) To replace the number plate light bulb on a Suzuki SX4, first, open the rear hatch of the boot. Next, remove the internal panel (either the right or …
How do you replace the license plate bulb on the Suzuki SX4?
How do you replace the license plate bulb on the Suzuki SX4?
Suzuki Sx4 (2006-2014 / GY, MK 1, EY, RW) It will be possible to replace the license plate bulb of the Suzuki SX4 by prying with an object to remove the device from its housing: once the old …
What is the unlock code for the Suzuki SX4 radio?
What is the unlock code for the Suzuki SX4 radio?
Suzuki Sx4 (2006-2014 / GY, MK 1, EY, RW) To obtain the unlock code for the Suzuki SX4 radio, you need to remove the device from its housing; this will allow you to read the serial number wri…

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos