Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Adjust the Handbrake on a Suzuki Swift?

Model: Suzuki Swift MK 2 - Years: 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999
Part: Parking brake

See other generations:
Video tutorial

In this tutorial, see how to adjust the handbrake on a Suzuki Swift. This is a straightforward and quick operation, especially after replacing the rear brake pads.

First, remove the two screws indicated using a cross-head screwdriver, then take off the tunnel cover and locate the bolt at the base of the handbrake lever. Once done, tighten the bolt using a spanner until you achieve the correct tension on the cable.

Finally, test the lever and reassemble everything by reversing the procedure.


Updated on 7 August 2026 by ScegliAuto


Related tutorials

How to Adjust the Handbrake on the Suzuki Swift
How to Adjust the Handbrake on the Suzuki Swift
Suzuki Swift (2004-2010 / MK 4, Rs41) This guide provides the main instructions for adjusting the handbrake on the Suzuki Swift. First, get inside the vehicle and remove the plastic cover…
How to Replace the Gear Knob on the Suzuki Swift
How to Replace the Gear Knob on the Suzuki Swift
Suzuki Swift (2017-2024 / MK 6, A2L) In this mini guide for owners of the new Suzuki Swift (2017-2023), discover the steps to replace the gear knob yourself. First, get inside the car an…
Where is the OBD2 Port on a Suzuki Swift?
Where is the OBD2 Port on a Suzuki Swift?
Suzuki Swift (2017-2024 / MK 6, A2L) If you want to access the OBD2 port inside your Suzuki Swift, simply follow the steps described in this guide. First, open the driver's side door and…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos