Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Remote Battery of the Suzuki Swift

Model: Suzuki Swift AZG, MK 5, Rs41 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Key

See other generations:
Video tutorial

In today's video, we will see a very simple car maintenance operation that you will likely have to perform often. Specifically, how to replace the battery of the car remote; in this case, for the Suzuki Swift.

First, open the remote casing, using a screwdriver or another pointed object. Then, remove the plastic part and access the battery compartment.

At this point, you can remove the old unit and insert a new one of the same type. Once done, test the remote, and if all is well, close the casing.


Updated on 8 August 2026 by ScegliAuto


Related tutorials

How to Replace the Remote Battery of the Suzuki Swift?
How to Replace the Remote Battery of the Suzuki Swift?
Suzuki Swift (2004-2010 / MK 4, Rs41) To replace the remote battery of the Suzuki Swift, you will need to loosen the screw located on the back of the remote, just below the key itself: on…
How to Replace the Remote Battery in the Suzuki Swift
How to Replace the Remote Battery in the Suzuki Swift
Suzuki Swift (2004-2010 / MK 4, Rs41) .. In today's video, you will see how to replace the remote battery of the Suzuki Swift. This tutorial also applies to other contemporaneous.. …
How to Change the Battery in the Key Remote of a Suzuki Swift
How to Change the Battery in the Key Remote of a Suzuki Swift
Suzuki Swift (2010-2017 / AZG, MK 5, Rs41) These quick steps will guide you through the disassembly and battery replacement process for the key remote of a Suzuki Swift. Start by taking your r…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos