Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Timing Chain on a Suzuki Swift?

Model: Suzuki Swift MK 4, Rs41 - Years 2004-2010
Part: Timing belt

To replace the timing chain on a Suzuki Swift, open the bonnet and remove the upper engine cover by loosening the screws. Once the cover is removed, detach the side protection panel to access the chain and its sprockets. Unscrew the central pin of the sprockets and loosen the tensioner screws to remove the chain and replace it with a new part. After installing the chain, check that the engine runs correctly.

Updated on 20 August 2026 by ScegliAuto

Video tutorial

Related tutorials

When to Replace the Timing Chain of the Suzuki Swift 1.3 DDiS
When to Replace the Timing Chain of the Suzuki Swift 1.3 DDiS
Suzuki Swift (2004-2010 / MK 4, Rs41) Today's guide will show you the main information useful for removing and replacing the timing chain of the Suzuki Swift 1.3 DDiS. Firstly, the manufa…
How do you replace the timing chain of the Suzuki Swift?
How do you replace the timing chain of the Suzuki Swift?
Suzuki Swift (2004-2010 / MK 4, Rs41) In order to replace the timing chain of the Suzuki Swift, you need to open the hood so that you have access to the components located inside the engi…
How Often Should the Timing Chain on a Suzuki Swift be Replaced?
How Often Should the Timing Chain on a Suzuki Swift be Replaced?
Suzuki Swift (2010-2017 / Rs41, AZG, MK 5) Regarding the timing chain of a car in general, this does not only apply to the 2012 Suzuki Swift, there is no scheduled replacement as it is designe…

    Frequently Asked Questions

    • Swift 2010-2017 - When should the timing chain be replaced in the Suzuki Swift? Read answer

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos