Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the Service light on the Suzuki Swift?

Model: Suzuki Swift Rs41, AZG, MK 5 - Years 2010-2017
Part: Service warning light

To reset the Service light on the Suzuki Swift, turn on the ignition by rotating the key. Then, press the TRIP button located on the right side of the instrument panel. Keep the button pressed until the "oil" message stops flashing. When the message becomes steady, release the button and turn off the ignition by rotating the key counterclockwise. At this point, you can turn the ignition back on to check that the Service light has been reset correctly.

Updated on 22 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a Suzuki Swift?
How to Reset the Service Light on a Suzuki Swift?
Suzuki Swift (2017-2024 / MK 6, A2L) To reset the Service light on a Suzuki Swift, turn the key in the ignition switch to turn on the instrument panel: once it is on, press and hold the …
How to Reset the Oil Light on a Suzuki Swift
How to Reset the Oil Light on a Suzuki Swift
Suzuki Swift (2017-2024 / MK 6, A2L) The steps to reset the oil light on a 2019 Suzuki Swift are: -turn on the ignition; -press and hold the right button on the dashboard for a few secon…
How to reset the "Service" light on a Suzuki Swift?
How to reset the "Service" light on a Suzuki Swift?
Suzuki Swift (2017-2024 / MK 6, A2L) To reset the "Service" light on a Suzuki Swift, turn on the instrument panel without starting the engine. Find the button located under the instrumen…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos