Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Suzuki
  4. :
  5. Vitara
  6. : How to adjust the handbrake cable on the Suzuki Grand Vitara

Suzuki Vitara - Video tutorial

Model: Suzuki Vitara LY - Years 2015-2023
Part: Hand brake
Operation: How to adjust the handbrake cable on the Suzuki Grand Vitara

In this video, we can see how to adjust the handbrake cable on the Suzuki Grand Vitara. We need to unscrew the screw located at the base of the central glove compartment, which also acts as a central armrest. There is one on the outside and two on the inside of the glove compartment. This way, we can lift the armrest and access the handbrake cables, which we can tighten with a common wrench. Tighten it so that the brake lever can come up to a maximum of three/four notches when fully raised. Now we can lower the glove compartment and tighten the three screws we loosened earlier. In the video, we can also see how to adjust the bearings: we need to remove the rear wheels and remove the rubber grommet on the disc; from there, we will adjust it using the tip of a screwdriver. Put the grommet back on. The job is done.


Posted on 20 April 2024 by ScegliAuto

    Frequently Asked Questions

    • Vitara 1999-2005 - How do you adjust the handbrake on the Suzuki Vitara? Read Answer

How to reset the TPMS light of the Volkswagen Polo 2011

The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition.

Watch the video!


by ScegliAuto

More videos