Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Adjusting the Handbrake on the Suzuki Vitara

Model: Suzuki Vitara JT - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Parking brake

See other generations:
Video tutorial

To adjust the tension of the handbrake on this car model, follow the instructions below for the necessary steps. If you find excessive resistance when pulling the handbrake lever or if the cable is too loose, lift the car and remove the rear wheel.

Position the drum disc with the hole aligned with the cable adjustment nut. Use a screwdriver to adjust the nut, then tighten or loosen the cable as needed.


Updated on 1 June 2026 by ScegliAuto


Related tutorials

How to Adjust the Handbrake on a Suzuki Vitara?
How to Adjust the Handbrake on a Suzuki Vitara?
Suzuki Vitara (2005-2015 / JT) To adjust the handbrake on a Suzuki Vitara, use a tool to lever off the trim that completely surrounds the centre tunnel. Then, proceed to remove the…
How to Adjust the Handbrake Cable on the Suzuki Grand Vitara
How to Adjust the Handbrake Cable on the Suzuki Grand Vitara
Suzuki Vitara (2015-2024 / LY) In this video, you can see how to adjust the handbrake cable on the Suzuki Grand Vitara. You need to unscrew the screw located at the base of the cen…
How to set the clock on the Suzuki Vitara?
How to set the clock on the Suzuki Vitara?
Suzuki Vitara (2015-2024 / LY) To adjust the clock on the Suzuki Vitara, insert the ignition key into the ignition switch and turn it to power on the instrument panel: press the ME…

    Frequently Asked Questions

    • Vitara 1999-2005 - How do you adjust the handbrake on the Suzuki Vitara? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos