Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Suzuki
    3. :
  3. Swift
    4. : How do you replace the timing chain of the Suzuki Swift?

Suzuki Swift - Video tutorial

Model: Suzuki Swift Rs41, MK 4 - Years 2004-2010
Part: Timing belt
Operation: How do you replace the timing chain of the Suzuki Swift?

In order to replace the timing chain of the Suzuki Swift, you need to open the hood so that you have access to the components located inside the engine compartment: on the left side of the engine block, you will find a protective panel that needs to be removed to access the chain underneath. This can be removed by loosening the screws that hold the tensioner in place and removing it from the appropriate gears; at this point, you can insert the new chain around the gears, ensuring that it is properly tensioned and checking that everything is functioning correctly.


Posted on 27 April 2024 by ScegliAuto

    Frequently Asked Questions

    • Swift 2010-2017 - What problems with the Suzuki Swift timing chain? Read Answer
    • Swift 2010-2017 - What should I do if I have timing chain problems in the Suzuki Swift? Read Answer
    • Swift 2010-2017 - When should the timing chain be replaced in the Suzuki Swift? Read Answer
    • Swift 2004-2010 - How many km do you change the Suzuki Swift timing chain? Read Answer
    • Swift 2004-2010 - How much does it cost to change the timing belt on the Suzuki Swift? Read Answer
    • Swift 2004-2010 - How many km do you change the timing chain of the Suzuki Swift 1300 DDIS? Read Answer
    • Swift 2004-2010 - How much does it cost to replace the timing chain for a Suzuky Swift? Read Answer

How to reset the TPMS light of the Volkswagen Polo 2011

The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition.

Watch the video!


by ScegliAuto

More videos