Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlight on a Suzuki Jimny

Model: Suzuki Jimny Jb23, Jb33, Jb43, Jb53 - Years 1998-2018
Part: Headlight

First, release the bonnet using the designated lever and lift it to support it with a suitable prop. Locate the rear of the headlight to find the cover protecting the back of the bulbs. This will allow you to extract the bulbs that need replacing and install the new ones. If your goal is to remove the headlight, simply unscrew the bolts securing it at the four corners. This way, you can pull the headlight out from the back. Retrace the steps for reinstallation.

Updated on 24 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Remove the Headlamp Bulbs on a Suzuki Jimny
Remove the Headlamp Bulbs on a Suzuki Jimny
Suzuki Jimny (1998-2018 / Jb23, Jb33, Jb43, Jb53) Remove the headlamp bulbs on a Suzuki Jimny. Open the front bonnet by pulling the lever located at the bottom right of the dashboard and secure it wi…
How to Replace the Front Headlamp Bulb on a Suzuki Jimny
How to Replace the Front Headlamp Bulb on a Suzuki Jimny
Suzuki Jimny (1998-2018 / Jb23, Jb33, Jb43, Jb53) Today, see the steps to remove and replace the front headlamp bulb on a Suzuki Jimny. First, open the bonnet of your car and start by removing the ru…
How to Remove and Replace the Front Headlamps on a Suzuki Jimny
How to Remove and Replace the Front Headlamps on a Suzuki Jimny
Suzuki Jimny (1998-2018 / Jb23, Jb33, Jb43, Jb53) Follow the steps below to remove and replace the front headlamps on a Suzuki Jimny, following the instructions provided. First, open the bonnet and b…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos