Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the headlight bulb on a Sym Citycom 300i?

Model: Sym Citycom 300 S
Part: Headlight bulb

Video tutorial

To replace the headlight bulb on a Sym Citycom 300i, loosen the screws that secure the front fairing of the bike to its housing: these screws will be located inside the front wheel arch and at the rear relative to the handlebars. Once all screws are loosened, you can completely detach the fairing from its housing and disconnect the internal connectors related to the headlights: this will now allow you to remove the bulbs inside, so they can be replaced with new spare parts.

After replacement, you can reassemble all components.


Updated on 25 October 2026 by ScegliAuto


Related tutorials

How to replace the headlight bulb on the Sym Citycom 300?
How to replace the headlight bulb on the Sym Citycom 300?
Citycom 300 S To replace the headlight bulb on the Sym Citycom 300, you need to loosen the screws that secure the panels located at the front of the motorcycle's f…
How to Replace the Fuel Pump on a Sym Citycom 300
How to Replace the Fuel Pump on a Sym Citycom 300
Citycom 300 S The instructions in this guide will show you how to disassemble and replace the fuel pump on the Sym Citycom 300 scooter. First, place the scooter on…
How to Change the Engine Oil and Gear Oil on a Sym Citycom 300 S
How to Change the Engine Oil and Gear Oil on a Sym Citycom 300 S
Citycom 300 S After covering a certain number of miles, you are required to perform a service. In this brief guide, I will show you how to change the engine oil an…

How to Dismantle the Engine of the Aprilia Leonardo?

To dismantle the engine of the Aprilia Leonardo, loosen the bolts securing it within its housing: once all the mounting bolts for the supports are loosened and the pipes and connectors are disconnected, you can remove the engine from its place. At this point, you can loosen the bolts securing the cylinder at the top of the bike, removing it along with the piston underneath. Once the connecting rod is freed from the crankshaft, you can open the engine block below and replace any internal parts if necessary.

Watch the video!


by ScegliAuto

More videos