Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
The instructions in this guide will show you how to disassemble and replace the fuel pump on the Sym Citycom 300 scooter. First, place the scooter on its stand and begin by removing the plastic cover located above the fuel tank; this will give you access to the fuel pump, disconnecting the fuel lines and the electrical connector to remove it, as shown in the video. At this point, install the new fuel pump, connecting it correctly; refuel and then start the engine!

Posted on 13 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the headlight bulb of the Sym Citycom 300?
How do you replace the headlight bulb of the Sym Citycom 300?
Citycom 300 S In order to replace the headlight bulb of the Sym Citycom 300, you need to loosen the screws that secure the panels located at the front of the motor…
How do you replace the front headlight bulb of the Sym Citycom 300i?
How do you replace the front headlight bulb of the Sym Citycom 300i?
Citycom 300 S In order to replace the headlight bulb of the Sym Citycom 300i, you need to loosen the screws that secure the front fairing of the motorcycle to its …
How to Change the Engine Oil and Gear Oil on a Sym Citycom 300 S
How to Change the Engine Oil and Gear Oil on a Sym Citycom 300 S
Citycom 300 S After covering a certain number of miles, you are required to perform a service. In this brief guide, I will show you how to change the engine oil an…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos