Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Sym Tonik
Part:

In order to install the chrome plating of the front fender of the Sym Tonik, you need to insert it into the bottom part of the front fender. Once this chrome plating has been inserted, you can place its screws in the holes located at the base of the fender. At this point, the screws inside the fender must be properly screwed in; by doing this, you will be able to securely attach the component to its housing and ensure that it is firmly in place and does not cause any issues during the vehicle's operation.

Posted on 22 June 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Install the Windscreen on the Sym Tonik?
How to Install the Windscreen on the Sym Tonik?
Tonik To install the windscreen on the Sym Tonik, rotate the wing mirrors counterclockwise so that the brackets for the windscreen can be inserted inside t…
How to Replace the Rear Brake Shoes on the Sym Tonik?
How to Replace the Rear Brake Shoes on the Sym Tonik?
Tonik To replace the rear brake shoes on the Sym Tonik, you need to loosen the pipe located above the exhaust and remove the bolts securing the mudguard an…
How to Install the Under Shield on the Sym Tonik?
How to Install the Under Shield on the Sym Tonik?
Tonik To install the under shield on the Sym Tonik, loosen the appropriate screws located on the inner side of the front shield of the motorcycle. Once the…

What Does the V-Belt Light Indicate on a Yamaha NMAX Scooter and How to Remove It?

If the V-BELT light has illuminated on the instrument cluster of your Yamaha NMAX scooter, it means it is time to replace the drive belt as it has exceeded the relevant interval. You can entrust this maintenance task to your trusted workshop; the cost will not be particularly excessive. Once this is done, you can manually reset the light by following the procedure shown in this tutorial. First, turn on the instrument cluster, then repeatedly press the left button on the dashboard to reach the service interval in question. At this point, press and hold the right button once to initialise the reset, and a second time to complete it.

Watch the video!


by ScegliAuto

More videos