Do it yourself
Frequently asked questions about cars and motorcycles
To replace the rear brake shoes on the Sym Tonik, you need to loosen the pipe located above the exhaust and remove the bolts securing the mudguard and the exhaust. This will allow you to completely remove the exhaust, accessing the nut that secures the central axle of the rear wheel. Once this has been removed, you can extract the old brake shoes from inside the drum and replace them with new spare parts. After replacement, reinstall all previously removed parts by following the operations in reverse order.

Updated on 28 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Tonik To replace the front brake pads on the Sym Tonik, loosen the bolts securing the caliper to the brake disc. Once the bolts are removed, detach the bra…
Tonik To replace the rollers in the Sym Tonik variator, first loosen the bolts securing the cover of the casing. Once all the bolts are removed, you can ta…
Tonik You can replace the rear light bulb on a Sym Tonik 50 by loosening the screws that secure the corresponding light unit: these screws will be located …

How to replace the exhaust on a Derbi Atlantis

Today, we will go through the instructions to remove and replace the exhaust on the Derbi Atlantis scooter in simple and quick steps. First, place the scooter on the centre stand and start unscrewing the screws of the exhaust terminal fixed to the rear frame; use a socket spanner with an extension, as shown in the video. At this point, if necessary, replace the exhaust manifold by removing the original; then install the new compatible and approved exhaust, applying the reverse procedure for reassembly!

Watch the video!


by ScegliAuto

More videos