Do it yourself
Frequently asked questions about cars and motorcycles

Model: Sym Tonik
Part: Brake pads

To replace the front brake pads on the Sym Tonik, loosen the bolts securing the caliper to the brake disc. Once the bolts are removed, detach the brake caliper from the disc and press it sideways to allow the pads to be pulled out from inside the caliper. After removing the old pads, insert new replacement parts and position the caliper back onto the disc. Secure it with the appropriate bolts and finally, check that the brake functions correctly.

Updated on 26 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Tonik To replace the rear brake shoes on the Sym Tonik, you need to loosen the pipe located above the exhaust and remove the bolts securing the mudguard an…
Tonik To replace the rollers in the Sym Tonik variator, first loosen the bolts securing the cover of the casing. Once all the bolts are removed, you can ta…
Tonik In order to install the chrome plating of the front fender of the Sym Tonik, you need to insert it into the bottom part of the front fender. Once thi…

How to Replace the Air Filter on the Husqvarna Svartpilen 401

These brief and simple steps will show you how to remove and replace the engine air filter on the Husqvarna Svartpilen 401, as well as the Vitpilen 401. First, place your motorcycle on its stand and begin removing the rider's seat; then unscrew the screws of the air filter cover located on the sides, as shown in the video. At this point, remove the air filter cartridge and replace it with a new one; insert it in the correct orientation and finally reassemble the filter box cover, remounting the rider's and passenger's seats!

Watch the video!


by ScegliAuto

More videos