Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

Sym Tonik - Videoguide

Sym Tonik
How do you install the Sym Tonik windscreen?
In order to install the Sym Tonik's shield guard, you need to loosen the specific screws located on the inner side of the motorcycle's front shield. Once these …read all…
Posted on 7 January 2024 by ScegliAuto
Sym Tonik
How do you replace the Sym Tonik muffler?
In order to replace the Sym Tonik muffler, you need to loosen the nuts that secure the muffler to the remaining part of the exhaust duct, also disconnecting …read all…
Posted on 31 August 2022 by ScegliAuto
Sym Tonik
How to install the windshield on the Sym Tonik?
In order to install the windshield on the Sym Tonik, the rear-view mirrors must be rotated anticlockwise, so that the brackets on which the windshield must be …read all…
Posted on 11 July 2022 by ScegliAuto
Sym Tonik
How do you replace the Sym Tonik front brake pads?
In order to replace the Sym Tonik front brake pads, you need to loosen the bolts that secure the caliper to the brake disc. Once the bolts have been removed, …read all…
Posted on 4 June 2022 by ScegliAuto
Sym Tonik
How do you replace the Sym Tonik belt?
In order to replace the Sym Tonik belt you need to loosen all the bolts that secure the cover of the crankcase located at the rear wheel. Once the casing is …read all…
Posted on 22 March 2024 by ScegliAuto
Sym Tonik
How do you replace the Sym Tonik rear brake shoes?
In order to replace the Sym Tonik rear brake shoes, you need to loosen the pipe located above the exhaust and remove the bolts that secure the mudguard and …read all…
Posted on 12 March 2024 by ScegliAuto
Sym Tonik
How do you replace the Sym Tonik variator rollers?
In order to replace the Sym Tonik variator rollers you must first loosen the bolts that secure the crankcase cover. Once all the bolts have been removed, it …read all…
Posted on 26 February 2024 by ScegliAuto
(1) Checks and maintenance (3) Muffler (1) Windshield (1) Brake pads (1)

How to replace the Ford Transit key battery

Below I will explain how to replace the remote control key battery on the car, take a small screwdriver and pry the rear part of the remote control, (where there is the ring), at which point unhook the back cover and yes will have access to the compartment containing the battery. Always with the help of the small screwdriver, proceed to make the va and lift the battery out of the housing. Then take the new battery (check the type) and place it on the housing, always making sure to position it with the positive pole facing upwards. Finally, close the back cover by re-hooking it to the key.

Watch the video!


by ScegliAuto

More videos