|
Do it yourself
| |||
| ||||
How to Replace the Rollers in the Sym Tonik Variator?
Model: Sym Tonik
Video tutorial
To replace the rollers in the Sym Tonik variator, first loosen the bolts securing the cover of the casing. Once all the bolts are removed, you can take off the casing to access the rollers. Then, by loosening the central pin, you can first remove the cooling fan and subsequently the variator, taking care with the belt. Once the old variator is removed, you can insert the new one, correctly fitting the belt around it. At the end of the installation, you can refit the fan and the casing cover.
Updated on 22 April 2026 by ScegliAuto
Related tutorials
Tonik
To replace the belt on the Sym Tonik, loosen all the bolts securing the cover of the casing located near the rear wheel. Once the casing is open, loo…
Tonik
You can replace the front indicator bulb on the Sym Tonik by loosening the screws that secure the inner cover of the motorcycle's front shield: once …
Tonik
To install the under shield on the Sym Tonik, loosen the appropriate screws located on the inner side of the front shield of the motorcycle. Once the…
|
How to Replace the Exhaust on the Suzuki GSX-R 600
To replace the exhaust on the Suzuki GSX-R 600, loosen the screws that secure the exhaust end can to its housing, located near the rear wheel on the right side of the bike. At this point, you can proceed by widening the connecting ring between the exhaust and the collector. Next, completely detach the old exhaust to position the new one: connect it to the collector by reinserting the ring and securing it to the bike's side supports. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.066
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
