|
Do it yourself
| |||
| ||||
Model: Sym Tonik
To replace the belt on the Sym Tonik, loosen all the bolts securing the cover of the casing located near the rear wheel. Once the casing is open, loosen the central pin of the variator using a socket spanner. After removing the variator, you can slide off the belt and loosen the central pin of the clutch bell. This will allow you to remove the other end of the belt, replacing it with a new one and reinstalling all previously removed parts.
Updated on 2 May 2026 by ScegliAuto
Video tutorial
Related tutorials
Tonik
To replace the rollers in the Sym Tonik variator, first loosen the bolts securing the cover of the casing. Once all the bolts are removed, you can ta…
Tonik
You can replace the rear light bulb on a Sym Tonik 50 by loosening the screws that secure the corresponding light unit: these screws will be located …
Tonik
You can replace the front indicator bulb on the Sym Tonik by loosening the screws that secure the inner cover of the motorcycle's front shield: once …
|
How to Replace the Air Filter on the Husqvarna Svartpilen 401
These brief and simple steps will show you how to remove and replace the engine air filter on the Husqvarna Svartpilen 401, as well as the Vitpilen 401. First, place your motorcycle on its stand and begin removing the rider's seat; then unscrew the screws of the air filter cover located on the sides, as shown in the video. At this point, remove the air filter cartridge and replace it with a new one; insert it in the correct orientation and finally reassemble the filter box cover, remounting the rider's and passenger's seats! by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.005
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
