Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light Bulb on a Sym Tonik 50?

Model: Sym Tonik
Part: Tail light bulb

Video tutorial

You can replace the rear light bulb on a Sym Tonik 50 by loosening the screws that secure the corresponding light unit: these screws will be located at the sides of the light. Once loosened, you can detach the light unit to access the bulb underneath: this can now be removed and disconnected from the corresponding connector to insert the new replacement part.

Then, cover everything with the corresponding light unit, securing it with the screws and checking that everything works correctly.


Posted on 19 August 2026 by ScegliAuto


Related tutorials

How to Replace the Front Indicator Bulb on the Sym Tonik
How to Replace the Front Indicator Bulb on the Sym Tonik
Tonik You can replace the front indicator bulb on the Sym Tonik by loosening the screws that secure the inner cover of the motorcycle's front shield: once …
How to Replace the Rear Brake Shoes on the Sym Tonik?
How to Replace the Rear Brake Shoes on the Sym Tonik?
Tonik To replace the rear brake shoes on the Sym Tonik, you need to loosen the pipe located above the exhaust and remove the bolts securing the mudguard an…
How to Replace the Belt on the Sym Tonik?
How to Replace the Belt on the Sym Tonik?
Tonik To replace the belt on the Sym Tonik, loosen all the bolts securing the cover of the casing located near the rear wheel. Once the casing is open, loo…

How to Dismantle the Engine of the TM Racing MX 125?

To dismantle the engine of the TM Racing MX 125, loosen the screws securing the side casing of the bike so that it can be removed, providing access to the clutch. Next, remove the spark plug from the top of the cylinder, then loosen the screws securing the cylinder as well: after removing the cylinder, you will be able to locate the piston underneath, which must be freed from the conrod by expanding its retaining ring. At this point, all further components within the engine block can be removed and replaced with new ones.

Watch the video!


by ScegliAuto

More videos