|
Do it yourself
| |||
| ||||
Model: Sym Joymax 250
Position the scooter on the centre stand. Remove the caliper retaining bolts and take the caliper off the wheel bracket. Use a screwdriver to detach the old pads from the brake caliper. Clean the brake caliper with a small brush to remove debris. Fit the new pads onto the caliper; attach the caliper to the brake disc. Tighten all bolts and test the braking of the scooter (check if bleeding is needed). Prepare to perform the same operations on the other calipers.
Updated on 9 March 2026 by ScegliAuto
Video tutorial
Related tutorials
Joymax 250
Before starting, sit on the rider's seat of your Sym Joymax 250. Begin by turning the key in the ignition switch to power up the instrument panel. Ne…
Joymax 250
In today's tutorial video, you will see how to remove and replace the spark plug of the Sym Joymax 250 scooter engine, following the instructions bel…
Joymax 250
Below are the instructions for replacing the coolant in the Sym Joymax 125 scooter. First, place the scooter on its stand and begin unscrewing the dr…
|
How to Replace the Battery in a Yamaha Vino 125 Scooter?
In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.008
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
