Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Gear Oil on a Sym Jet 100

Model: Sym Jet 100
Part: Transmission fluid

Video tutorial

In this short video, learn how to change the gear oil on the Sym Jet 100 scooter by following these simple steps. First, position the scooter on its centre stand and start by unscrewing the oil drain bolt located near the wheel, under the transmission, using a socket spanner.

Also, open the fill hole to allow the oil to drain out more quickly. At this point, screw the drain bolt back in and use a syringe to pour in the new oil, filling the transmission case until oil flows out of the hole.


Updated on 29 April 2026 by ScegliAuto


Related tutorials

How do you disassemble the engine of the Sym Jet 100?
How do you disassemble the engine of the Sym Jet 100?
Jet 100 In order to disassemble the engine of the Sym Jet 100, you will need to loosen the screws that secure the block to its housing located in the center …
How do you dismantle the engine of the Sym Jet 100?
How do you dismantle the engine of the Sym Jet 100?
Jet 100 It will be possible to completely disassemble the engine of the Sym Jet 100 by unscrewing all the screws that secure the engine to its housing locate…

How to Reset the V-Belt Light on a Yamaha Xmax 125?

On the Yamaha Xmax 125, the V-Belt light can be reset by turning on the instrument panel with the ignition key inserted in the ignition switch. Once the instrument panel is powered, you can remove the panels located on the left front side. Below, you will find a connector that needs to be disconnected for five seconds, as shown in the relevant tutorial. Once this time has passed, reconnect the connector to turn off the light completely. At the end of the procedure, you can turn off the instrument panel.

Watch the video!


by ScegliAuto

More videos