Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Sym Joymax 250
Part: Engine oil

Want to change the oil on the Sym Joymax 250 scooter? Let's see how to remove the oil filter and change the oil itself. Secure the scooter on the centre stand and begin by removing the air filter. Unscrew the locking bolt of the container where the oil is stored. Allow the oil to drain into a container. Once drained, you can screw the oil bolt back in. Remove the oil filter with a strap wrench if it is a large filter, otherwise use a socket wrench if it is a mesh filter. Replace all filters. Top up with the new oil recommended by the manufacturer.

Updated on 2 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to change the engine oil in the SYM Joymax 250 scooter?
How to change the engine oil in the SYM Joymax 250 scooter?
Joymax 250 In this tutorial, you can see how to change the engine oil in the SYM Joymax 250 scooter, a very simple and quick operation. Before proceeding, wait …
How to Change the Engine Oil on a Sym Joymax 250i
How to Change the Engine Oil on a Sym Joymax 250i
Joymax 250 In today's tutorial, learn how to perform the routine maintenance oil change on a Sym Joymax 250i scooter. First, position your scooter on the centre…
How to Reset the "Service" Light on a Sym Joymax 250
Joymax 250 Before starting, sit on the rider's seat of your Sym Joymax 250. Begin by turning the key in the ignition switch to power up the instrument panel. Ne…

How to Replace the Spark Plug on a Piaggio Vespa SXL 125 Scooter?

In this tutorial, you will see how to replace the spark plug on a Piaggio Vespa SXL 125 scooter, a very simple and quick operation. Before proceeding, ensure that the key is not inserted for safety. Start by unscrewing the indicated screw and opening the small lower door, then disconnect the connector from the spark plug and begin unscrewing it using a long 16 mm socket. Once completely removed, insert the replacement and tighten it without applying excessive force, as it could be damaged. Finally, reconnect the connector and reposition the door.

Watch the video!


by ScegliAuto

More videos