Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery of the Sym HD 200

Model: Sym Hd 200 Evo
Part: Battery

Video tutorial

This guide shows how to replace the battery of the Sym HD 200 Evo. The scooter's battery is located under the floorboard. Access this component by removing the four screws securing the plastic battery cover; two screws are on the floorboard and two on the sides of the plastic cover, under the seat.

Once the compartment is opened and the panel is lifted, you can proceed to remove the battery. Unscrew the locking screws of the electric accumulator and finally disconnect the electrical connectors.

During this last operation, ensure the connectors do not touch each other or the battery.


Updated on 8 May 2026 by ScegliAuto


Related tutorials

How do you replace the exhaust pipe of the Sym HD 200?
How do you replace the exhaust pipe of the Sym HD 200?
Hd 200 Evo It will be possible to replace the muffler on the Sym HD 200 by loosening the screws that secure the exhaust terminal to its housing: once these scre…
How to Replace the Radiator Fluid on the Sym HD 200
How to Replace the Radiator Fluid on the Sym HD 200
Hd 200 Evo In this video tutorial, you will learn how to bleed and replace the coolant on the Sym HD 200 scooter in simple steps. First, remove the plastics loc…
How to Replace the Front Brake Pads on the Sym HD 200
How to Replace the Front Brake Pads on the Sym HD 200
Hd 200 Evo Discover in this brief guide how to remove and replace the front brake pads on the Sym HD 200 scooter, following the instructions below. First, place…

How to Change the Engine Oil in a Suzuki DR 350?

In this tutorial, you will see how to change the engine oil in a Suzuki DR 350, a very simple and quick operation. First, wait until the engine is cold enough, then remove the protective frame located at the bottom. Next, position a container underneath the bike, disconnect the indicated hose, and let all the oil in the system drain out. Then, open the filter housing by unscrewing the three bolts with an 8mm spanner, remove the old filter, and insert the replacement. At this point, you can reassemble everything and pour in the new oil through the designated hole.

Watch the video!


by ScegliAuto

More videos