Do it yourself
Frequently asked questions about cars and motorcycles

How to Dismantle the Variator and Rollers of the Sym Mio

Model: Sym Mio
Part:

Video tutorial

In this video tutorial, you will see the procedure necessary to dismantle and replace the variator, along with the rollers, of the Sym Mio scooter. First, put the central stand down and start by removing all the bolts from the cover, using a socket spanner; then proceed to remove the nuts from the fan and the bell, as shown in the video.

At this point, remove the belt and then the variator, along with the rollers; replace the latter with new ones, using original spare parts, following the video tutorial to the end for reassembly!


Updated on 3 June 2026 by ScegliAuto


Related tutorials

Mio In order to replace the variator of the Sym Mio scooter, you need to loosen the screws that secure the transmission cover panel: this will be located…
Mio To replace the belt on the Sym Mio, you need to loosen the screws that secure the cover of the casing near the rear wheel, beneath which the transmis…
Mio Before you start, sit on the seat of your Sym Mio. Activate the instrument panel by turning the key in the ignition. Then, press the right button on …

How to Assemble the Engine Block of the Husaberg FE 501

Here are the instructions to assemble the engine block of the Husaberg FE 501 enduro bike. First, assemble the engine transmission by installing the gear ratios and then the clutch assembly; after that, install the engine's thermal part by reassembling the crankshaft and then the cylinder head assembly (including piston, cylinder, and head), as shown in the video. At this point, install the stator and flywheel, as well as the electrical components of the engine, following the video tutorial to the end for reassembly!

Watch the video!


by ScegliAuto

More videos