Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this video tutorial, you will learn how to remove and replace the electrical stator of the Sym Voyager GTS 125 scooter. First, place the scooter on the centre stand and begin by removing the exhaust, unscrewing all the screws on the sides. Then disconnect the coolant hose, allowing the fluid to drain into a container. At this point, unscrew the screws of the cover, gaining access to the flywheel and the stator; remove the stator by disconnecting the wiring, and replace it with the new one, applying the reverse procedure!

Updated on 3 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the rear brake pads on the Sym Voyager GTS 125?
How to replace the rear brake pads on the Sym Voyager GTS 125?
Voyager Gts 125 To replace the rear brake pads on the Sym Voyager GTS 125, loosen the screws that secure the caliper to the corresponding disc, allowing you to compl…
How to Replace the Rear Tyre on a Sym Voyager GTS 125
How to Replace the Rear Tyre on a Sym Voyager GTS 125
Voyager Gts 125 In today's tutorial video, you will see the instructions for removing and replacing the rear wheel and tyre of the Sym Voyager GTS 125 scooter. First…
How do you disassemble the engine of the Sym Voyager GTS 125?
How do you disassemble the engine of the Sym Voyager GTS 125?
Voyager Gts 125 To disassemble the engine of the Sym Voyager GTS 125, you need to loosen the screws that secure the block to its housing, which is located at the cen…

How to Reset the Engine Oil Light on a Yamaha XMax 250

This short video demonstrates the procedure to reset the engine oil light on a Yamaha XMax 250 scooter. The operation is very simple and quick; first, insert the motorcycle key into the designated slot and turn it to the first position to power on the instrument panel without starting the vehicle. At this point, you will see the light on the display; simply press the "oil change" button located at the centre of the motorcycle's speedometer and hold it until the light stops flashing. The operation will then be complete; to verify success, turn off and then turn on the instrument panel.

Watch the video!


by ScegliAuto

More videos