Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Sym Voyager Gts 125
Part: Tires

In this short guide, we will see the instructions that will allow us to disassemble and replace the rear tire of the SYM Voyager GTS 125 scooter. First of all, we put the scooter on the center stand and start to disassemble and remove the rear wheel; to do this, we remove the exhaust silencer by unscrewing the fixing screws, as shown in the video. At this point, we disconnect the suspension from the lower part and disconnect the brake caliper, unscrewing the wheel nut to remove it; we replace the tire using levers, following the video tutorial until the end!

Posted on 5 June 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Wheel of the Sym Voyager GTS 125
How to Remove the Front Wheel of the Sym Voyager GTS 125
Voyager Gts 125 In this brief and simple guide, you will learn how to remove the front wheel and replace the tyre of the Sym Voyager GTS 125 scooter, as well as the …
How to Replace the Rear Tyre on a Sym Voyager GTS 125
How to Replace the Rear Tyre on a Sym Voyager GTS 125
Voyager Gts 125 In today's tutorial video, you will see the instructions for removing and replacing the rear wheel and tyre of the Sym Voyager GTS 125 scooter. First…
How do you disassemble the engine of the Sym Voyager GTS 125?
How do you disassemble the engine of the Sym Voyager GTS 125?
Voyager Gts 125 To disassemble the engine of the Sym Voyager GTS 125, you need to loosen the screws that secure the block to its housing, which is located at the cen…

How to Reset the Engine Oil Light on a Yamaha XMax 250

This short video demonstrates the procedure to reset the engine oil light on a Yamaha XMax 250 scooter. The operation is very simple and quick; first, insert the motorcycle key into the designated slot and turn it to the first position to power on the instrument panel without starting the vehicle. At this point, you will see the light on the display; simply press the "oil change" button located at the centre of the motorcycle's speedometer and hold it until the light stops flashing. The operation will then be complete; to verify success, turn off and then turn on the instrument panel.

Watch the video!


by ScegliAuto

More videos