Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Restore the Air Conditioning That Doesn't Work on a Tata Tiago

Model: Tata Tiago MK 1 - Years 2016-2024
Part: Air conditioning

If the air conditioning in your Tata Tiago is not working, you need to access the fuse box located under the steering column and the air fan right above it. Remove the front cover of the fan: it comes off easily because it is snap-on; note the anchoring points. Also, remove the cover from the other side. Clean both compartments thoroughly. In the video, both covers contain the fan and are both damaged. Now, install the new covers with the fan. Be very careful with the anchoring points before snapping them in place. Check the functionality of the assembly before proceeding with the complete fastening. Proceed with the other assembly. The job is done.

Updated on 22 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Open the Door of the Tata Tiago if the Smart Key Doesn't Work
How to Open the Door of the Tata Tiago if the Smart Key Doesn't Work
Tata Tiago (2016-2024 / MK 1) If the smart key for your Tata Tiago suddenly stops working and you can't open the door, don't worry because this guide will show you how to solve th…
Where Are the Fuses Located on the Tata Tiago?
Where Are the Fuses Located on the Tata Tiago?
Tata Tiago (2016-2024 / MK 1) The fuses of the Tata Tiago are housed in dedicated fuse boxes installed in the vehicle: this type of car has two fuse boxes. The first is located in…
How to Replace the Headlight Bulb on the Tata Tiago
How to Replace the Headlight Bulb on the Tata Tiago
Tata Tiago (2016-2024 / MK 1) To replace the headlight bulb on the Tata Tiago, open the hood to access the components inside the engine compartment. Specifically, you will need to…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos