Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front wipers on the Tata Sumo

Model: Tata Sumo Gold - Years 2012-2019
Part: Windshield wipers

Let's see in this guide the instructions necessary to disassemble and replace the front wipers of the Tata Sumo, in simple steps. First let's move to the front of our car and start raising the front wiper arm; then we go to rotate and detach the wiper clip, in order to remove it from the arm, as shown in the video. At this point we are going to install the new wiper blade, hooking it perfectly onto the arm; we perform the same operation to replace the other wiper, but also the rear window wiper!

Posted on 27 May 2022 by ScegliAuto

Video tutorial

Related tutorials

Where is the fuse box located in the Tata Sumo?
Where is the fuse box located in the Tata Sumo?
Tata Sumo (2008-2016 / Grande) If you are looking for the fuse box in your Tata Sumo and haven't been able to find it yet, don't worry because the following guide will help you sol…
How do you replace the oil filter on the Tata Sumo?
How do you replace the oil filter on the Tata Sumo?
Tata Sumo (2012-2019 / Gold) To be able to replace the oil filter on the Tata Sumo you need to access the lower part of the engine compartment, in correspondence with the left fr…
How do you replace the air filter on the Tata Sumo?
How do you replace the air filter on the Tata Sumo?
Tata Sumo (2004-2011 / Victa) In order to replace the air filter on the Tata Sumo, you need to open the bonnet, so that you can access the filter box located at the front right he…

How to Remove the Brake Disc on Mitsubishi Pajero

How to remove the brake disc along with the brake pads on a Mitsubishi Pajero? First, lift the vehicle on a column lift to a suitable height for working. Next, remove the wheel (using a telescopic spanner or air drill) with the respective bolts. Undo the locking bolt of the brake caliper, and remove it from the caliper support. Remove the caliper support from the wheel hub using a socket spanner. Once the brake disc is free, undo the screws with a fixed spanner and detach the disc from the wheel hub. Disconnect the various wiring and brake fluid pipes from the wheel assembly. Replace them with new parts (always use original and compliant parts). Prepare to install the new disc along with the respective pads, brake caliper, caliper support, etc.

Watch the video!


by ScegliAuto

More videos