Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Tata
    3. :
  3. Tiago
    4. : How to disassemble the air filter in the Tata Tiago?

Tata Tiago - Video tutorial

Model: Tata Tiago MK 1 - Years 2016-2023
Part: Air filter
Operation: How to disassemble the air filter in the Tata Tiago?

As we can see in this tutorial, disassembling the air filter in the Tata Tiago is an extremely simple and fast operation. Before proceeding, make sure that the engine is completely cold in order to operate in complete safety. We start by opening the hood, then locate the filter box and unscrew all the bolts placed along the entire perimeter of the same. Once this is done, we remove the top half and extract the old filter from the housing, which will need to be cleaned of any residue. Finally, we insert the possible spare part and reassemble everything following the reverse procedure.


Posted on 2 August 2022 by ScegliAuto



How to replace the air filter of the Tata Tiago.
Tata Tiago (2016-2023 / MK 1) If the air filter inside your Tata Tiago is now too worn out and no longer guarantees optimal performance, then you must necessarily proceed with its
How to replace the cabin filter in the Tata Tiago?
Tata Tiago (2016-2023 / MK 1) As we can see in this tutorial, replacing the cabin filter in the Tata Tiago is an extremely simple and fast operation. First of all let's position o
Where are the fuses of the Tata Tiago located?
Tata Tiago (2016-2023 / MK 1) The fuses of the Tata Tiago are contained within the appropriate fuse boxes that are installed on the vehicle: in this type of car, it is possible to

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos