Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Disable the Passenger Airbag in the Tata Hexa?

Model: Tata Hexa MK 1 - Years 2016-2020
Part: Airbag

In this tutorial, you will see how to disable the passenger airbag in the Tata Hexa, a very simple operation to perform whenever you position a rear-facing child seat. First, turn off the vehicle and go to the passenger seat. Then, locate the switch on the outer panel of the dashboard. Next, insert the key into the slot, turn it, and set the selector to the "OFF" position. When you start the vehicle again, you will see a warning light on the instrument panel indicating that the airbag is disabled. Reactivate it by following the reverse procedure.

Updated on 12 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Disabling the passenger airbag of a Tata Hexa
Disabling the passenger airbag of a Tata Hexa
Tata Hexa (2016-2020 / MK 1) In today's video, we will see how to deactivate the passenger airbag on a Tata Hexa, a necessary operation when, for example, installing a child seat…
How to Remove the Steering Wheel Airbag from the Tata Hexa?
How to Remove the Steering Wheel Airbag from the Tata Hexa?
Tata Hexa (2016-2020 / MK 1) To remove the steering wheel airbag from the Tata Hexa, rotate the steering wheel first to the left and then to the right to release the pins at the …
How to Install a Dash Cam in the Tata Hexa
How to Install a Dash Cam in the Tata Hexa
Tata Hexa (2016-2020 / MK 1) As shown in the video, installing a dash cam in the Tata Hexa is quite simple. You need a basic understanding of electronics to install it. Start at …

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos