Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Cabin Air Filter on the Tata Nano Genx

Model: Tata Nano Genx MK 1 - Years: 2015, 2016, 2017, 2018
Part: Cabin air filter

Video tutorial

If you need to clean the blower in the air conditioning system and replace the filter, follow the instructions below and refer to the images in the video. The cabin air filter on this vehicle is located under the dashboard on the passenger side.

To access it, bend down under the dashboard near the floor and locate the box containing the filter. Then, remove the cover and take out the filter, replacing it with a new one or cleaning it. After that, reposition the filter in the housing and close the cover.


Updated on 2 July 2026 by ScegliAuto


Related tutorials

Tata Nano Genx (2015-2018 / MK 1) To replace the armrest on the Tata Nano GenX, remove the old armrest from its housing on the top of the center tunnel. Once removed, unscrew the supp…
Tata Nano Genx (2015-2018 / MK 1) Today, in this brief guide, we will cover the main instructions on how to remove and replace the rear bumper on the Tata Nano Genx in simple steps. F…
Tata Nano Genx (2015-2018 / MK 1) In this short and simple guide, learn how to remove and replace the headlight bulb of the Tata Nano Genx. First, open the hood of your car and start …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Other guides you may be interested in

Resetting the Service Light on the Mitsubishi Canter

When it is necessary to change the engine oil of the Mitsubishi Canter, a warning on the dashboard alerts us to this requirement. Once this maintenance task is completed, you must reset the control system. Sit in the driver's seat and turn on the instrument panel. Without starting the engine, press and hold the accelerator pedal for twenty seconds. After this time interval, while still holding the accelerator pedal, pump the brake pedal six times. Once done, the warning on the instrument panel will turn off, confirming the reset.

Watch the video!


by ScegliAuto

More videos