Do it yourself
Frequently asked questions about cars and motorcycles

How to Change the Battery on the Tata Indigo

Model: Tata Indigo CS - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Battery

Video tutorial

To replace the battery on this vehicle, you can find some information on the operations to perform in this video and description. First, open the bonnet and locate the battery on the right side of the engine bay. Then, proceed to disconnect the negative terminal first, followed by the positive terminal.

Extract the battery from the engine bay and place the new one in its housing. Connect the positive terminal on the new battery first, then the negative terminal, completing the job.


Updated on 7 July 2026 by ScegliAuto


Related tutorials

Tata Indigo (2008-2016 / CS) Replacing the diesel filter on a Tata Indigo is an extremely simple and quick operation; let's see how to proceed in this tutorial. First, wait for t…
Tata Indigo (2008-2016 / CS) In this tutorial, you will see how to remove the rear light on a Tata Indigo Manza, a very simple and quick operation. First, open the boot lid. Then…
Tata Indigo (2008-2016 / CS) If you need to replace the air filter on this car model, you can refer to the images in the video tutorial and the description of the various steps b…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Resetting the Service Light on the Mitsubishi Canter

When it is necessary to change the engine oil of the Mitsubishi Canter, a warning on the dashboard alerts us to this requirement. Once this maintenance task is completed, you must reset the control system. Sit in the driver's seat and turn on the instrument panel. Without starting the engine, press and hold the accelerator pedal for twenty seconds. After this time interval, while still holding the accelerator pedal, pump the brake pedal six times. Once done, the warning on the instrument panel will turn off, confirming the reset.

Watch the video!


by ScegliAuto

More videos