Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Fuel Filter on a Tata Indigo?

Model: Tata Indigo CS - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Diesel fuel filter

Video tutorial

Replacing the diesel filter on a Tata Indigo is an extremely simple and quick operation; let's see how to proceed in this tutorial. First, wait for the engine to cool completely, then open the bonnet and locate the filter next to the battery.

Next, unscrew the long fixing bolt, grasp the filter body from below, and, turning it counterclockwise, separate it from its support. Once done, ensure you have also removed the old gasket, position the replacement, and reassemble everything by following the reverse procedure.


Updated on 13 June 2026 by ScegliAuto


Related tutorials

Tata Indigo (2008-2016 / CS) In this tutorial, you will see how to remove the rear light on a Tata Indigo Manza, a very simple and quick operation. First, open the boot lid. Then…
Tata Indigo (2008-2016 / CS) If you need to replace the air filter on this car model, you can refer to the images in the video tutorial and the description of the various steps b…
Tata Indigo (2008-2016 / CS) If you want to attempt replacing the air filter on this car model yourself, you will find instructions on how to proceed in the video and the descrip…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Other guides you may be interested in

Resetting the Service Light on the Mitsubishi Canter

When it is necessary to change the engine oil of the Mitsubishi Canter, a warning on the dashboard alerts us to this requirement. Once this maintenance task is completed, you must reset the control system. Sit in the driver's seat and turn on the instrument panel. Without starting the engine, press and hold the accelerator pedal for twenty seconds. After this time interval, while still holding the accelerator pedal, pump the brake pedal six times. Once done, the warning on the instrument panel will turn off, confirming the reset.

Watch the video!


by ScegliAuto

More videos