Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to set the correct time on the Tata Nano.

Model: Tata Nano MK 1 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Clock

Video tutorial

To set the correct time on the instrument panel of your Tata Nano, simply read the following guide carefully and follow the various steps described. First, enter the cabin and start the car's ignition, then press and hold the two buttons located inside the panel together and release them as soon as the time starts to flash.

Next, press the right button to select the hours and change the number by pressing the left button multiple times. Repeat the same procedure for the minutes, then press the right button one last time to save the changes made.


Posted on 19 January 2026 by ScegliAuto


Related tutorials

How to Replace the Diesel Filter on a Tata Nano?
How to Replace the Diesel Filter on a Tata Nano?
Tata Nano (2008-2015 / MK 1) The diesel filter on the Tata Nano is located at the bottom of the vehicle: to access it, you will need to lift the car with a jack to locate the par…
How to Replace the Interior Light Bulb on a Tata Nano?
How to Replace the Interior Light Bulb on a Tata Nano?
Tata Nano (2008-2015 / MK 1) To replace the interior light bulb on a Tata Nano, you need to detach the light fitting covering it, located just behind the internal rear-view mirro…
How to Replace the Cabin Filter in a Tata Nano?
How to Replace the Cabin Filter in a Tata Nano?
Tata Nano (2008-2015 / MK 1) In this tutorial, you will see how to remove the cabin filter in a Tata Nano, a very simple and quick operation to perform if you need to clean it or…

How to Set the Clock on a Renault Master 3

This guide shows you how to set a new time on a Renault Master 3. Start by turning on the instrument cluster of the vehicle without starting the engine. Next, using the end of the right-hand steering column stalk, scroll through the options on the display until you reach 'set time', then press the down arrow button to make the displayed time blink. Once this is done, press and hold the down arrow button to change the hour, which you can adjust using the two arrow buttons at the end of the stalk. Once the correct hour is set, press and hold the down arrow button again to move to the minutes. After setting the correct time, restart the vehicle.

Watch the video!


by ScegliAuto

More videos