Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the battery on the Tata Nano

Model: Tata Nano MK 1 - Years 2008-2015
Part: Battery

If we intend to replace the battery on this type of car ourselves, we can refer to the instructions in this description and also take a look at the video. On this car model, the battery is located under the driver's seat and to access it, the seat itself must be folded back. Then proceed with a spanner to unscrew the fixing nuts of the upper support plate and then proceed to connect first the negative terminal and then the positive one. Then remove the battery and replace it with the new one and then reconnect first the positive pole and then the negative pole and rehook the upper support plate.

Posted on 16 February 2023 by ScegliAuto

Video tutorial

Related tutorials

How do you change the engine oil on the Tata Nano?
How do you change the engine oil on the Tata Nano?
Tata Nano (2008-2015 / MK 1) In order to replace the engine oil of the Tata Nano, you need to access the lower part of the car, where the oil drain plug is located. This must be …
How to set the correct time on the Tata Nano.
How to set the correct time on the Tata Nano.
Tata Nano (2008-2015 / MK 1) To set the correct time on the instrument panel of your Tata Nano, simply read the following guide carefully and follow the various steps described. …
How do you replace the brake shoes on the Tata Nano?
How do you replace the brake shoes on the Tata Nano?
Tata Nano (2008-2015 / MK 1) In order to replace the brake shoes of the Tata Nano you have to go and lift the car with a jack to make sure that the wheel to which you will need t…

Other guides you may be interested in

How to Remove the Spark Plugs on an Opel Astra

Want to remove the spark plugs on an Opel Astra? Here's how to proceed: pull the engine bay release lever and lift the front bonnet, securing it. Remove the plastic cover on the soundproofing panel covering the engine (if present), then remove the pins on the coil bar using a screwdriver. Disconnect the coils by hand after unplugging the power connector, then use your socket to unscrew the spark plugs and pull them out of the cylinder head. Take the new spark plugs and guide them into the engine head with the socket extension, tighten them and reconnect the respective power connectors. Finally, close the engine bay.

Watch the video!


by ScegliAuto

More videos