Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Brake Shoes on a Tata Nano?

Model: Tata Nano MK 1 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Brake drums and shoes

Video tutorial

To replace the brake shoes on a Tata Nano, lift the car with a jack so that the wheel needing the shoe replacement is off the ground. Then, loosen the bolts securing the wheel and completely remove it to access the underlying drum.

By unscrewing the fastening screws, you can open the drum and access the shoes inside, disconnecting them from the brake mechanism. You can now install the new shoes, securing them to the mechanism and finally closing the drum to reinstall the corresponding wheel.


Updated on 27 June 2026 by ScegliAuto


Related tutorials

How to Replace the Diesel Filter on a Tata Nano?
How to Replace the Diesel Filter on a Tata Nano?
Tata Nano (2008-2015 / MK 1) The diesel filter on the Tata Nano is located at the bottom of the vehicle: to access it, you will need to lift the car with a jack to locate the par…
How to Replace the Interior Light Bulb on a Tata Nano?
How to Replace the Interior Light Bulb on a Tata Nano?
Tata Nano (2008-2015 / MK 1) To replace the interior light bulb on a Tata Nano, you need to detach the light fitting covering it, located just behind the internal rear-view mirro…
How to Replace the Cabin Filter in a Tata Nano?
How to Replace the Cabin Filter in a Tata Nano?
Tata Nano (2008-2015 / MK 1) In this tutorial, you will see how to remove the cabin filter in a Tata Nano, a very simple and quick operation to perform if you need to clean it or…

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos