Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the chassis number and engine number of Tata Telcoline?

Model: Tata Telcoline Tl MK 1 - Years 1988-2024
Part: Checks and maintenance

Let's see together in this guide, where to find the engine number and the chassis number of the Tata Telcoline, in simple and quick steps. First of all, we open the bonnet of our car and start looking for the identification plate of our vehicle; we find it at the bottom, on the central part of the engine compartment, where the engine number is indicated. Instead, we find the chassis number on the car's slip, lowering ourselves on the right side of the car, as shown in the video. For further information on the vehicle, we refer to the use and maintenance booklet!

Posted on 19 March 2023 by ScegliAuto

Video tutorial

Related tutorials

Check main functions of Tata Telcoline before leaving
Check main functions of Tata Telcoline before leaving
Tata Telcoline Tl (2006-2022 / MK 2) Before setting off with the Tata Telcoline make sure that the main functions of the vehicle are all set up. Especially if you have to drive on slippe…
How to change the power steering fluid on the Tata Telcoline TI
How to change the power steering fluid on the Tata Telcoline TI
Tata Telcoline Tl (2006-2022 / MK 2) In this video we will show you how to change the power steering fluid on the Tata Telcoline TI. First of all make sure that it is really necessary to…
How to service the rear brakes on the Tata Telcoline Tl
How to service the rear brakes on the Tata Telcoline Tl
Tata Telcoline Tl (1988-2024 / MK 1) If we need to carry out maintenance on the rear drum brakes of the car we can proceed as follows, also referring to the video: first you need to loos…

Other guides you may be interested in

Removing the Front Arm Bushing of a Hyundai Getz

Let's look at removing the front arm bushing of a Hyundai Getz. First, place the car on a column lift and loosen the wheel nuts with a telescopic spanner, then remove the wheel. Use a socket spanner to unscrew the lower securing bolt of the arm and the bolt mounted under the wheel hub, then unscrew the bolts on the upper part of the arm (as shown in the video). Remove the bushing from the bolt housing. Always compare the parts to be replaced with the new ones; if they are suitable, you can install them. Start the installation of the new part: fit the new bushing and tighten all bolts to the specified torque. Double-check the correct tightening of the parts. Refit the wheel to complete the job.

Watch the video!


by ScegliAuto

More videos